Sampling

Low Pressure Systems (15-50psi)

• Attach reusable thread on probe (LF-4) to clean 1/4" OD (3/16" ID) PVC tubing.

• Remove L series dust cap

• Thread LF-4 onto L series sampling valve and drain oil into new bottle.

Non Pressurized Systems (<15psi)

• Attach reusable thread on probe (LF-4) to clean 1/4" OD (3/16" ID) PVC tubing

• Attach the bottle to the Vacuum (VAC) handle and insert the PVC tubing.

• Draw sample, keeping the Vacuum in an upright position.

• Loosen the Vacuum (VAC) handle and insert the PVC tubing about 1/4" inch below the head. Tighten the handle to grip tubing firmly.  

View L Sampling Instruction FAQ